Gallery

– Patient present with poor aesthetics, failing dentistry, uneven occlusal planes and crowding resulting in poor function.
-Posterior teeth are restored with crowns and composite fillings where necessary.
– Orthodontics is completed to level planes of occlusion and correct spacing.
– Teeth are bleached.
– Porcelain crowns are placed on four upper front teeth.
– Case is restored to ideal aesthetics and function.

-Patient presents with poor aesthetics and uneven occlusal plane resulting in poor function.
Patient also presents with poor lower bridges and failing restorations on upper front teeth.
– Orthodontics is completed to level occlusal planes and correct tissue heights.
– Crowns are placed on six upper front teeth.
– Bridge are replaced on lower back teeth.
– Patient is restored to ideal aesthetics and functions.

– Patient presents with poorly placed implants and restorations on two upper front teeth, uneven occlusal planes, poor aesthetics and poor function.
– Orthodontics is completed to level planes of occlusion and position teeth ideal as possible.
– Lower front teeth are shortened and reshaped.
– Teeth are bleached.
– Six upper front teeth are restored with porcelain utilizing previous existing implants.
– Case is restored to ideal aesthetics and function.

-Patient presents with poor aesthetics and function with resulting wear, abfractions and recession.
-Lower teeth are bleached and reshaped.
-Upper teeth are restored with porcelain Emax crowns to correct aesthetics and function.

-Patient presents with severe wear from poor function.
-Patient has bridgework with poor color on natural teeth.
-Patient’s wear has resulted in short teeth and overclosure (Lost vertical dimension).
-All teeth are restored to correct aesthetics and function and to re-establish vertical dimension.

-Patient presents with poor color, function and crowding with resulting recession, abfractions and excessive wear.
-Patient also has some failing restorative dentistry.
-Crowns are placed on all teeth to restore aesthetics and function.

-Patient presents with aging dentistry.
-Patient has poor function, resulting in anterior wear and recession.
-Patient also has missing teeth with existing bridges.
-Crowns and bridges to replace missing teeth are placed on all teeth to restore Aesthetics and Function with level plane of occlusion.

-Patient presents with aging dentistry on 2 front teeth with gap or diastema.
-Tissue heights on front teeth are uneven.
-Patient has anterior wear and recession from poor function.
-Teeth are bleached.
-Lower front teeth are reshaped to ideal plane of occlusion.
-Crowns are placed on upper 6 front teeth to ideal aesthetics and function.

-Patient presents with worn teeth due to poor function.
-Patient is missing several posterior teeth.
-Color and shapes of teeth are not ideal.
-Tissue positioning of upper front teeth is poor.
-Crown Lengthening is completed on upper laterals, canines and right bicuspid to reposition tissues to match front teeth.
-Implant with crown is placed on upper right and lower left to replace missing teeth.
-Crowns are placed on all teeth to idealize aesthetics and function.

-Patient presents with crowded, uneven occlusal planes and worn teeth as a result of poor dental function.
-Multiple posterior crowns were failing.
-Multiple posterior teeth were hopeless and needed extracting.
-Orthodontics was completed to idealize tissue and teeth positioning.
-Implants were placed in upper right and left posterior to replace missing teeth.
-Lower front teeth were bleached and reshaped.
-Crowns were placed on ten upper front teeth and four lower teeth to idealize aesthetics and function.

-Patient presents with worn front teeth, due to poorly positioned teeth and resulting bad bite.
-Color of teeth are irregular.
-Orthodontics is completed to level planes of occlusion and idealize tooth positioning.
-Teeth are bleached.
-Lower front teeth are reshaped.
-Veneers are placed on upper two front teeth to idealize aesthetics and function.

-Patient presents with inflamed tissues and worn upper and lower front teeth due to poor function.
-Orthodontics is completed to level planes of occlusion.
-Teeth are bleached.
-Crown lengthening is completed on four upper front teeth to idealize tissues.
-Frenectomy (removing muscle attachment) is completed between the two upper front teeth.
-Porcelain crowns are placed on upper canines.
-Veneers are placed on upper four front teeth.
-Lower front teeth are reshaped.
-Patient is restored to ideal aesthetics and function.

– Patient presents with missing upper right front tooth.
– Patient has wear on front teeth and crowded lower front teeth from uneven occlusal planes and poor function.
– Right upper lateral incisor has significant wear and is darker in color.
– Orthodontics is completed to level planes of occlusion and correct crowding.
– Teeth are bleached.
– Lower front teeth are reshaped.
– Implant is placed to replace missing front tooth.
– Crowns are placed on implant and upper right lateral incisor to Ideal aesthetics and function.

-Patient presents with previously fractured front teeth restored with composites as a child and poorly shaped lateral incisors.
-Patient previously had orthodontics to correct bite and alignment of teeth.
-Teeth were bleached.
Crowns were placed on upper four front teeth to idealize function and aesthetics.

-Patient presents with crowded and hyper-erupted lower front teeth and small upper lateral incisors.
-Orthodontics is completed to correct bite and align teeth.
-Teeth are bleached.
-Porcelain veneers are completed on upper lateral incisors to correct aesthetics and function.

-Patient presents with hyper-erupted upper front teeth with poor porcelain restorations, worn lower front teeth and recession on posterior teeth, all caused by poor bite.
-Patient is unhappy with color of teeth.
-Crowns were placed first molar to first molar in both arches to restore correct function and idealize aesthetics.

-Patient presents with full mouth breakdown caused by poor bite.
-Lower front teeth are hyper-erupted.
-Upper front teeth are also hyper-erupted because of excessive wear.
-Right front tooth (lateral incisor) has fractured resulting in need for extraction.
-Patient is over closed (lost vertical dimension) because of worn teeth.
-All teeth are in need of restoration because of wear and or dental caries.
-Crown lengthening is completed on lower front teeth, upper front teeth and upper bicuspids to correctly position tissues.
-A dental implant is placed in the missing tooth site.
-Crowns are placed on all teeth and implant at an increased vertical dimension to restore the patient to the correct aesthetics and function.

-Patient presents with reverse smile, gaps in upper front teeth, hyper-erupted and crowded lower front teeth resulting in wear on front teeth.
-Orthodontics is completed to correctly position teeth.
-Teeth are bleached.
-Lower teeth are reshaped.
-Upper front six front teeth are restored with porcelain crowns to ideal aesthetics and function.

-Patient presents with hyper-erupted lower front teeth, reverse smile and small upper lateral incisors.
-Poor bite results in anterior wear.
-Orthodontics is completed to correctly position teeth.
-Lower front teeth are reshaped.
-Teeth are bleached.
-Lateral incisors are restored with porcelain crowns and central incisors are restored with porcelain veneers to ideal aesthetics and function.

-Patient presents with hyper-erupted and crowded lower front teeth resulting in anterior wear.
-Patient has unaesthetic crown and recession on front tooth and wear on left lateral.
-Posterior teeth are also poorly positioned.
-Orthodontics is completed to correctly position teeth.
-Teeth are bleached.
-Top and bottom four front teeth are restored with porcelain crowns to Ideal Aesthetics and Function.

-Patient presents with poor color, severe wear, erosion, mal-positioned teeth and slightly closed vertical dimension.
-Lower front teeth are hyper-erupted and worn.
-Crown lengthening is done on lower front teeth to position tissues correctly for restoration.
-Crown are placed on all teeth except upper 1st and 2nd molars.
-Vertical dimension is opened by placing crowns on all lower teeth.
-Case is restored to ideal aesthetics , function and occlusion.

-Patient presents with poor color, severe wear, erosion, mal-positioned teeth and slightly closed vertical dimension.
-Lower front teeth are hyper-erupted and worn.
-Crown lengthening is done on lower front teeth to position tissues correctly for restoration.
-Crown are placed on all teeth except upper 1st and 2nd molars.
-Vertical dimension is opened by placing crowns on all lower teeth.
-Case is restored to ideal aesthetics , function and occlusion.

-Patient presents with poor occlusion including crowded lower front teeth with severe wear.
-Patient has failing upper front porcelain fused to gold bridge with missing tooth.
-Patient also has bone loss in the site of missing tooth.
-Patient had Invisalign-Orthodontics, minimal treatment to help correct tooth position.
-Area of missing front tooth was bone grafted and implant placed.
-Teeth were bleached.
-Crowns were placed on front four teeth upper and lower and implant crown to correct Occlusion and Aesthetics.

-Patient presents with severe wear resulting in lost vertical dimension (over closed)
-Front teeth are over erupted because of wear
-Porcelain is old with poor color -Patient has uneven occlusal planes
-Crown Lengthening was completed on two upper front teeth and upper left bicuspid
-Crowns were placed on all lower teeth, second bicuspid to second bicuspid and upper front teeth to open vertical dimension (how patient was before wearing teeth)
-Occlusal planes were leveled and aesthetics were idealized

-Patient presents with small peg laterals and poorly shaped pointed canines as a teenager.
-Lower front Teeth are Hyper erupted and crowded.
-Orthodontics was completed to idealize tooth position.
-Teeth were bonded for interim restorations until patient was done growing.
-Some shifting of teeth occurred.
-Crown lengthening was completed on right 2 front teeth.
-Veneers were fabricated for 4 front teeth and 2 crowns on the canines to Idealize Aesthetics and Function.

-Patient presents with severe wear resulting in lost vertical dimension (over closed)
-Front teeth are over erupted because of wear.
-Tooth color is poor.
-Patient has uneven occlusal planes.
-Patient shows excessive gingiva on upper teeth when smiling.
-Crown lengthening was done on lower front teeth, upper bicuspids and 3 right front teeth.
-Crowns were placed on all teeth to open vertical dimension, how patient was before wearing teeth and occlusal planes were leveled.

-Patient presents with bone loss and mobile teeth from past history of smoking.
-Patient has soft tissue loss and bone loss in area of upper front teeth.
-Lower front teeth are over erupted resulting in uneven occlusal plane and wear.
-Lower front teeth are reshaped to correct height.
-Crowns are placed on upper six front teeth and Occlusal Equilibration (adjust bite) is completed to correct aesthetics and function.

*Correct bite on mobile teeth is critical to treatment plan success.

-Patient presented with poor shapes on upper four front teeth.
-Lateral incisors have failing previously bonded restorations with poor color.
-Edges of lower front teeth are slightly worn and rough.
-Lower front teeth were smoothed to correct shape.
-Crowns were placed on upper four front teeth to correct aesthetics and function.

-Patient presents with severe wear resulting in lost vertical dimension. (Over closed)
-Front teeth have hyper-erupted because of wear.
-Tooth color is poor.
-Patient shows excessive gingiva because of hyper-eruption of teeth from wear.
-Occlusal planes are uneven and back teeth are tucked in.
-Crown Lengthening was done on lower front teeth and 10 upper front teeth.
-Crowns were placed on all teeth to an opened vertical dimension, how patient was before wearing teeth-resulting in over closure of teeth.

-Patient has mal-aligned worn anterior teeth with poor color and dark triangles.
-Lower front teeth are too high and are repositioned orthodontically to correct plane of occlusion.
-Teeth are bleached to improve color.
-Porcelain crowns are placed on 6 upper front teeth and 4 lower front teeth to Idealize Aesthetics and Function.

-Patient has mal-aligned worn anterior teeth with poor color and dark triangles.
-Lower front teeth are too high and are repositioned orthodontically to correct plane of occlusion.
-Teeth are bleached to improve color.
-Porcelain crowns are placed on 6 upper front teeth and 4 lower front teeth to Idealize Aesthetics and Function.

-Patient presents with severe wear on upper lateral incisors and canines at very young age.
-Patient has poor function on worn canines which protect remainder of the dentition, if positioned properly and are the correct length.
-Bottom front teeth are not level.
-Patient bleached teeth
-Lower front teeth are reshaped to Ideal shape and position.
-Porcelain crowns are placed on the upper lateral incisors and canines to correct aesthetics and function.

-Patient has crowded anterior teeth w/severe wear.
-Teeth have poor color from Tetracycline stain.
-Patient has poor function w/uneven occlusal planes and crowding.
-Crown Lengthening on all upper right teeth and lower left front tooth to idealize tissue positions.
-Crowns were placed on upper and lower 10 front teeth to reposition teeth (Immediate Orthodontics) to Idealize Aesthetics and Function.

-Patient has a skeletal problem, where lower jaw is too far forward.
-Teeth hit on edges incorrectly causing wear on all the front teeth.
-Case ideally involves skeletal surgery but cannot get insurance approved.
-Patient is treated with orthodontics.
-Crowns are placed on 10 upper front teeth, 4 lower front teeth & implant on left canine because of fractured root to idealize esthetics and function.

-Patient has severe wear on all front teeth because of poor bite.
-Color is poor.
-Patient has multiple missing upper posterior teeth and poor failing restorative fillings on posterior teeth.

-Case is restored to Ideal Esthetics and Function.
-Teeth are bleached.
-Entire maxillary arch is restored with porcelain; including upper posterior zirconia bridges to replace missing teeth & Emax crowns on front teeth.
-Lower posterior molars are restored with porcelain Emax crowns or 3M Z250 composite.
-Lower front teeth are shaped.

– Patient has upper bridge to replace missing right front tooth.
– Upper front teeth (central incisors) are too wide for adjacent teeth (lateral incisors).
Lower front teeth are crowded and hyper-erupted (too high), resulting in wear on lower front teeth.
– Patient has dark triangle between upper front 2 teeth and front right tooth is too short.
– Orthodontics was completed to align lower teeth and reposition upper teeth to allow for restorations.
– Implant was placed to replace missing right front tooth.
– Lower front teeth were reshaped and upper front teeth were restored with porcelain Emax crowns to correct esthetics and function.

-Patient has worn front teeth because lower front teeth are crowded and too high.

-Orthodontics are completed to level planes of occlusion and idealize tissue positions on front teeth.

-Crowns are placed on upper and lower front two teeth.

– Patient had peg shaped or small in size upper lateral incisors, previously treated with composite filling material to restore shape and esthetics.
– Patient also had previous orthodontic history with resulting TMJ and facial muscle problems, including weekly temporal headaches.
– Patient was treated with splint therapy to establish TMJ health, muscle health and correct joint position.
– Patient was then treated orthodontically to correct function and esthetics.
– Last, patient had veneers done on lateral incisors to correct esthetics and give more permanent result than removed composite filling material.